CUTE FLEXI PORCUPINE

**3D model description**

Super cute, flexible & fits on almost all 3D printers.

Contains multiple painted profiles (2x or 4x colors) for various printers expertly optimised for an easy printing experience.

Fully print in place with no brim or support required.

**3D printing settings**

Before printing please ensure you have a freshly cleaned build plate to maximize print bed adhesion. I test printed multiple on 2x sperate pei sheets but a super tack build plate would help minimalize adhesion issues.

I recommend even when using the print profile to read the bold text below

Print settings (rather simple but please follow thoroughly to ensure a 100% success rate)

I recommend printing at a layer height of 0.24

Regular wall thickness of 0.42 and classic walls (default)

Z hop enabled (length 0.2 / z hop when retract 2. / z hop type normal)

Print speed of 90mm/s recommended (possible to go higher but decided its best to print safely due to the flexis high design)

**The 1st layer has been painted in a separate color with a separate color profile with different flow settings to increase first layer adhesion - for example when printing the 4 color using the supplied a1 mini & p1s print profile, colors 2 & 5 are to be printed from the same slot in your ams unit, this allows you to print with 1 ams unit using the same color with the only difference being the flow rate on the first layer (so when using the print profiles & sending the job to your printer, colors 2 & 5 are to be sent to the same color slot on your ams so only 4 colors are needed & the black eyes and first layer will be printed using the same ams slot with the only difference being the flow rate)

When printing the 2 color, color slots 2 & 3 are also using the same color slot on your ams when sending the print to your printer. ( for example, you are using brown on slot 1 of your ams & black on slot 2 of your ams - when sending the the job to your printer select slot 1 for the first color and select slot 2 for the second & third color)**

I made these small changes to hopefully bring everyone a much easier printing experience however if anyone has any issues printing then I'll be sure to assist as best as possible, enjoy )