D1 Xtool air assist and hose guide that retains focus and lock functions

thingiverse

I remixed this to have the air hose connector on the same side as the focus lever but in a position that it can still be easily used. I also added a new air hose guide that uses two of the laser module screw positions, this reduces any flex on the hose connection. As well as rerouting the pipe, I added extra thickness to the area where the 3d printer nozzle screws in. The original file has the M6 1.0mm thread but I found I needed to tap it, so the extra thickness helps. The 3d nozzle is drilled out to 2mm. The orange shield needs to have a hole cut to allow the exit - an 11mm hole should be enough. This is specifically for the D1 16mm laser module fitted to the non pro version. A standard 5mm internal, 8mm external hose fits. Two m3 x 35mm screws will be needed, as the fan cover 30mm are not long enough.