Damping foot - Voron 2.4

prusaprinters

<p>I experimented a bit with the feet of my voron 2.4 printer and my latest design consists of 2 parts: a harder outer shell for stability (PETG) and a damping inner part from TPU.</p><p>The hard shell can be mounted to the frame easily. The TPU core is just pressed into the shell and held inside by friction and the weight of the printer.</p><p>The TPU is a nice addition which works very good. But if you only want a simple foot then the shell will also work. That's what i previously used.</p><p><strong>Printing:</strong></p><p>Shell:</p><ul><li>2 perimeters / 3 top and bottom layers/ 15% infill / 0.6mm nozzle /0.3mm Layer height</li></ul><p>Core:</p><ul><li>2 perimeters / 3 top and bottom layers/ 10% infill / 1.2mm nozzle /0.5mm Layer height</li></ul>