Dart Zone Dictator Thanhlon Mag
thingiverse
An extended magazine for the Dart Zone Dictator. You can load darts from either side, as many as you can fit. There are two versions: a single length version for printing on large format printers, and a two-half version with a binder piece in the middle. The two halves of the magazine must be glued together; superglue works well. If you have a large format printer, you will need: 2x thanhlon_dictator 2x [ThanhlonFollower](https://www.thingiverse.com/thing:3460408) 2x [Drum Spring](https://outofdarts.com/products/replacement-drum-spring-created-by-foamblast) If you have a standard sized printer, you will need: 1x dictator_binder 2x thanhlon_dictator_left 2x thanhlon_dictator_right 2x [ThanhlonFollower](https://www.thingiverse.com/thing:3460408) 2x [Drum Spring](https://outofdarts.com/products/replacement-drum-spring-created-by-foamblast)
With this file you will be able to print Dart Zone Dictator Thanhlon Mag with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dart Zone Dictator Thanhlon Mag.