Dart Zone Nexus Pro Short Side Rails
thingiverse
Introducing small side rails for the Nexus Pro! Since there was only long side rails available, I decided to make my own short one. For the rails, there is only support needed is from the bed. For the assembly: 1-Open your blaster 2-Put your rail from the outside about where you want it to be. 3-Put two rail clips on the INSIDE, and align the holes from the clip with the holes from the rail. 4-Put a screw* in the rail from the outside and make sure it goes in the clip, otherwise your rail will fall off... 5-Close you blaster and enjoy! *I used screw for an old PC that are similar in diameter to Nerf screws, so anything that fits in the hole is fine.*
With this file you will be able to print Dart Zone Nexus Pro Short Side Rails with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dart Zone Nexus Pro Short Side Rails.