Davinci - E3D Custom Carriage
thingiverse
Custom carriage for E3D hotend and Davinci XYZ designed to be used with hardened steel rods and SC8UU bearings. Features: - The hotend can easily be swapped out. (for example, when I print in nylon I use 3mm while everything else is 1.75mm) - There is room under the carriage for many of the preexisting E3D fan ducts. - The spacers can be used to raise the carriage if needed. Otherwise make sure to use one of these to adjust the z-axis height: https://www.thingiverse.com/thing:621440 - The heater block is very exposed. Swapping out different sized nozzles is so easy! - I included a mounting point for future accessories. - The PCB can be installed on top of the carriage above the recessed screw hole. - The carriage movement is extremely smooth and quiet. To connect the x-axis belt to the carriage: Drill and tap two small holes in the aluminum bearing housing. Secure belt with screws and large washers.
With this file you will be able to print Davinci - E3D Custom Carriage with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Davinci - E3D Custom Carriage.