DE Razor Blade Pack Dispenser Tower

prusaprinters

<p>This dispenser tower for packs of double-edge safety razor blades was built from scratch, but was inspired by the one created by Rolts. I wanted them to dispense from the narrow side, I wanted an open slot so it's easy to reach in and move the packs, and I wanted to make it as tall as my Prusa Mini could print, which is 18cm tall.</p><p>I use a red extra fine tip Sharpie marker to write the date used on each razor pack, so I added a marker holder with an 11mm diameter hole on the front. I also uploaded a version without the marker holder.</p><p>A hard plastic 5-pack of Derby blades is about 53mm x 30mm x 11mm, and this tower can hold 17 of those. If you're using cardboard packs that are less tall, this could fit a couple more.</p><h3>Print Settings</h3><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>Yes</p><p><strong>Resolution: </strong>200</p><p><strong>Infill: </strong>15</p><p><strong>Filament: </strong>PLA<br/> </p><p><strong>Notes: </strong></p><p>Paint on supports for the bottom opening.</p><p>Neither the Sharpie holder now the arches at the top of the finger slots require supports.</p>