Dell Dock spacer for E5450, E5470, E7240 E7440 etc.

prusaprinters

<p>IMPORTANT: while this part fit perfectly for me, people in the comments report it's too long. It was printed on my old printer that perhaps wasn't well calibrated, so if it doesn't fit please try the remixed version that's a little bit shorter.</p> <h3>Why?</h3> <p>Dell's dock compatibility is legendary, basically everything with an E-port will fit in every version of an E-port dock. However, Dell moved the docking port a bit further back on their newer laptops, requiring a spacer ("XJD0R") that costs ~13 euros.</p> <p>Considering the fact that for 13 euros I can make almost 20 spacers myself, I decided to do just that.</p> <h3>Features</h3> <ul> <li>Tested with E5450 &amp; E5470 laptops on PRx03 and XX6F0 docking stations</li> <li>Laptop can still be docked with a small USB dongle in the back</li> </ul> <h3>Instructions</h3> <p>Print with the top side down so you don't have to bother with supports.</p> <h3>Open source</h3> <p>As always the fusion360 file is included, so feel free to improve the design.</p> <h3>Original credit:</h3> <p>Even though I did not use any resources from Fyrftd's model, I did use some parts of his design. The main differences are in the support structures, mounting point and actual width of the spacer.</p> <p>I don't know if it qualifies, but I marked this as a remix just in case.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Wanhao</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Wanhao Duplicator i3 V2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>.3mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>25%</p></div> <p><strong>Notes:</strong></p> <p>Please note that this model is just as wide as the build area on the Wanhao i3/Maker Select. That said it printed just fine on my printer.</p> </p></p></p> Category: Computer