Dell Monitor Stand to VESA 100 Adapter

thingiverse

Remix of a remix of a Dell monitor stand to VESA mount adapter. Reused the overall geometry, location and size of mounting holes, Changes: * I only wanted the VESA 100 pattern, so I took more material out of the center. * Flattened it to move the stand closer to the panel like it would be on a Dell monitor. * As part of flattening, eliminated the screw head countersinks. The Dell stand has about 4.5mm of space at the 100mm VESA points anyway. * Resized the holes to be a tight fit with M4 screws. * Added holes in the rim behind the bottom mount fingers. The second STL is a peg that fits in the holes under the mount to retain the stand. It's just a tapered rectangle to press-fit in place as a shim. Print two if you want to use them. The monitor will hang just fine without them, but this way if you grab the screen to tilt it it can't come loose. The pegs will probably need to be rotated to sit flat on the print bed. If you look really close or pay attention to the slicer's preview, you'll see that the STL has a cut around the screw holes. It is too small to actually be realized in the print (.05mm) but it causes the slicer to put extra walls there for reinforcement against screw pressure. Grandparent: Dell Monitor Stand VESA 75 adapter by oudent https://www.thingiverse.com/thing:2505647 Parent: Dell Monitor Stand VESA 75 / 100 adapter by Rhazgular https://www.thingiverse.com/thing:2663771 And, then a few months later I found a need for a VESA 75 adapter, so it's been edited to add the 75mm option back. Gave it a 2mm indent to account for screw heads.