Delta Pro Lerdge K2 Upgrade Mount

thingiverse

Based off the Lerdge K board mount. But I found the positioning of the new board inside the Delta Pro to not be ideal and didn't want to cut off the existing X standoffs so I created a mount that uses the bottom two existing in-built standoffs from the standard X board but positions the larger board in a better place. All cables reach the new board & new position. Instructions: 0. Remove the old Lerdge X board, but label all your cables first! 1. Use tape (I used kapton but scotch works) to secure the nuts in the countersunk slots on bottom of mount. The mount will be installed first before the new Lerdge board so the tape holds the nuts in place so you can install the mainboard after. 2. Seat the mount (without new mainboard installed) over the bottom two standoffs and secure with two M3x6 screws. I used nylon M3x6 screws that came with the K2 board kit to avoid shorting the bottom of the mainboard but also left enough room incase you don't have nylon screws. 3. Place mainboard onto mount and secure with 5x M3x12 screws. The M3 nuts you taped in place in step 1 should be perfectly positioned by the tape. Remove tape if you're so inclined, I left it. #YOLO 4. Enjoy a securely attached K2 board in a printer that was designed for a Lerdge X board! Hardware required: 5x M3 Button Head Cap Bolts & matching Nuts: https://www.amazon.com/gp/product/B07CYNKLT2?ie=UTF8&psc=1&linkCode=sl1&tag=chilofthenode-20&linkId=ebed2c9968269b215012297fef093820&language=en_US&ref_=as_li_ss_tl 2x Nylon screw (included in the Lerdge K2 upgrade kit) Lerdge K2 Upgrade Kit (surprisingly easy upgrade thanks to this post: https://www.reddit.com/r/3Dprinting/comments/kcsr5g/monoprice_delta_pro_what_i_had_to_find_out_the/?utm_medium=android_app&utm_source=share) - https://www.aliexpress.com/item/1005001934986356.html Supports needed but very small.