Delta Rocket - RC Glider or EDF Jet

grabcad

this is a delta rocket that you can power with a size A rocket engine.this can be converted to a glider by adding a servo for each ailer, a receiver and a 1s or 2s battery.this can also be converted to an edf jet when the plans are scaled up to the desired edf size.Notes:For use as a rocket/glider;- you do not need to use the cable cover, the ducts or the exhaust.- Use a size A rocket and this should get you about 100m up.-If u have servos setup, you can fly the model back down to earth.For EDF purposes:-you will need to use all the pieces.-scale up the plans and print to desired measure.When Printing:-Be sure to print all pieces standing and on angles that make it easy for your style of printer.- I printed this model at 100 mm/s - 0% infill - 0 top/bottom thickness - 0.4 up to 0.8 for the shell 0.4 was better for flying 0.8 was better as a rocket only model.-Bed Heat = 65c-Extruder Heat = 200c-Printed with a brim of 5 layers.