Desktop Horizontal Phone Stand with Fan Cooler AVA(Adjustable Viewing Angle)

thingiverse

A good phone stand/holder for when you phone is not in your hands, ie. watching a video while eating, or not using you phone and charging. Contains x2 4010 Cooling Fan slots to cool your phone if it gets hot! I personally use 12VDC 3D printer 4010 cooling fans. Mounting legs require x2 M3x10mm screws. (one screw per leg) *NOTE! You need to drill the fan slot mounting holes yourself, this is to allow perfect fitting of the fan to prevent printing offset and personal bolt size, I use M3 screws and bolts. *METHOD OF DRILLING The following steps is what I used to install the fans. 1. Fit the fans onto the face slot (the surface where you put your phone), 40x40mm should fit nicely, mine did perfect. 2. Use a drill bit size to your preference and any drilling tool(as long as it will drill through 0.3mm thick of PLA), and drill through via the mounting holes on you fan. I drilled for a total of 8 holes. 3. Remove the fans and mount them at the back side of the holder with screws or bolts and nuts. I used x8 M3x10mm bolts and x8 M3 nuts. 4. Voila! Dimensions in mm (W * L * H) (126 * 60 * 80) @Holder 90° Happy cooling!