Detachable clamps De Walt Tablesaw

thingiverse

These are Clamps for the De Walt DWE 7491 and 7492 , they should be made out of ABS or a higher rated tool filament. infill i used is 20 % honeycomb with a solid layer every 10 layers. printed in 0.2 mm layer height . i did use a 20 mm brim around it for extra adhesion to the bed. itook off the handle and the wheels from the stand itself , and with that i bolted the clamps on the stand frame. i needed it to be more compact. if you do not want to take it off you will need 4 m8 60 mm bolts with nuts. if you set the stand up , you now can simply click the tablesaw on top of it , and removing it is very easy, yet it is strong enough that it will keep in place when you are set it up to use it. (I SHOULD'NT HAVE TO MENTION ---->under normal stress<---- AND AT YOUR OWN RISK) if you still want the option to "wheel around'' on the josite, i did make some slots in the brackets so you can put a strap thru it and tight it up. if you printed them out, and you are pleased with them, please let me know in the comments, also credits are very much appreciated!