DF65/95 Yacht Stand Mk2, 4 Positions

thingiverse

***Updated version of the DF 65 / 95 yacht stand.*** https://www.thingiverse.com/thing:3248354 ------------------------------------------------------------------ Added printed tees, resized all holes to fit M5 screws, made the catch wider, new drill jig & added washers for outside of the pipe. Printed Parts, All printed in PETG except for the feet and collars, which are printed in a flexible filament. Cradle, 2 off 5mm Hinge Washers, 2 off Frame Hinge, 2 off Tube Washers, 6 off 20mm Plug, 2 off 20mm Plug Slotted, 2 off Catch, 1 off Drill Jig, 1 off Feet, 4 off Collar, 2 off Tee - right, 2 off Tee - left, 2 off Keel Support, 1 off Hardware, 20mm Electrical conduit. M5 X 50mm, S/S Pan Head Screws, 6 off M5 S/S Nylock Nuts, 6 off 4G X 10mm S/S Self tapper screws. Instructions, 1. Cut conduit into the correct lengths. 2 X 500mm, Long legs 2 X 340mm, Short legs 2 X 232mm, Cross braces for small frame 1 X 285mm, Cross brace for large frame 1 X 290mm, Handle 2. Drill the 5mm holes in the long legs using the drill jig as these dimensions are critical. 3. Bolt the long legs to the cradles using the M5 X 50mm screws. 4. Assemble the small frame, use S/S self tappers to lock in place, 5. Use two M5 X 50 screws to join the two frames together with the printed 5mm hinge washers between. 6. Slide the 20mm handle into the cradles with the catch with a collar on either side.(the collars are just to keep the brace in the centre of the stand). When happy with the alignment put 2 self tappers in the holes in the bottom of the cradles to lock the handle in place. 7. Screw the keel support to the long legs. 380mm from the top of the legs to the top of the support, using 4G Self Tappers, then fit bottom cross brace for the long legs. 8. Put some padding on the cradle arms to protect the yacht. 9. Push in the feet and conduit plugs. 10. Go sailing! For a larger yacht stand suitable for an IOM, https://www.thingiverse.com/thing:3250906 28/02/2019 Added holes in bottom of cradles to lock handle and enlarged the holes in the tube washers.