DH410 Quadcopter Parts

thingiverse

These are replacement landing gear files for DH-410 foldable frame for a drone. Version 3 is the latest & THE BEST one that is lighter in weight and uses less material too. Also it has a groove for the LED wires to pass underneath. After printing, please pry out the little support from within the groove. Groove is wider and goes parallel to the sides of the landing gear (not shallow and across) Please refer the pictures above. Please print it with NO support. Required support is built in; just pry out as explained above, and shown in 2nd and 3rd pic. 40% infill or more. The version-2 will be much more stronger than version 1. Version-2 (LandingG-Longer.stl) is a longer (38.1mm/1.5" longer) version of the original, so as to accommodate the 3 axis gimbal with proper ground clearance. It is also one piece solid of 10.5mm thickness (insead of 2mm). Version 1 - I made it 2mm thick in PLA (looks like the original that came with the frame) I test printed it in 1mm thickness, and with 20% infill just to check how it fits. It fits and works perfect. But it could be weaker in comparison to original Carbon fiber one. If printed with ABS/PLA with more than/= 70% infill and 2mm thick, it could be bit stronger. Not tried yet! GPS Mound included. In future, I might come out with more parts related to DH-410. 07/May/2019 - update Pixhawk Mount, Electronics Bay, Pixhawk LED Dome, XT-60 Lipo-Battery Lock - new files added. Electronics bay also divided in to 2 parts for easy printing (part 1 and 2). Please like it if you download. Thanks :-)