Dice Tower and Case (Plinko Style)

prusaprinters

<p>**Note: I never printed/tested this. See the note below for an explanation. For my newer designs that I did print, see <a href="https://www.prusaprinters.org/prints/10121-dice-tower-and-organizer-plinko-style">https://www.prusaprinters.org/prints/10121-dice-tower-and-organizer-plinko-style</a> and <a href="https://www.prusaprinters.org/prints/10137-plinko-dice-tower-with-magnetic-latch-and-detachab">https://www.prusaprinters.org/prints/10137-plinko-dice-tower-with-magnetic-latch-and-detachab</a></p> <p>A plinko style dice tower. It includes a case that can store dice and pencils when it's not in use. When it's time to play, the case becomes the dice tray.</p> <p>It's designed to use 1/4" plexiglass in the front because it's more fun if you can see the dice rolling. The actual thickness of the plexiglass I used is 0.222". Find the piece I used here: <a href="http://a.co/b3aKqLg">http://a.co/b3aKqLg</a>.</p> <p>I've included an stl for the front. This can be used as the front piece or as a guide to cut your plexiglass.</p> <p><strong>Note:</strong><br/> I designed this before I got my 3d printer. It's an adaptation/update of a dice tower I designed and made out of wood. After getting a few prints under my belt, I realized that 3d printing required a different design approach than woodworking. I scrapped this design and started over. Well, just in case some people prefer this design, I decided to publish it anyway. My newer, preferred design is here: <a href="https://www.thingiverse.com/thing:206089">http://www.thingiverse.com/thing:206089</a> The new one has an open front, it does not require assembly or plexiglass, it includes an organizer for use during play, and it's easy to print with no supports</p> <h3>Print instructions</h3><p><strong>Supports:</strong> Yes</p>