Digital Multi-Memory Card Holder

prusaprinters

<p>I remixed this from a different design that I found on Thingiverse (https://www.thingiverse.com/thing:46335), and made some mods which I consider improvements for my use, and thought others might agree. To see actual prints of my remix, check out the “Makes” tab (I print basically everything I design.)</p><p>Here are the things I added/changed:</p><ul><li>Rounded the bottom edge a bit, so it isn't so pointy</li><li>Added dimples/imprints for rubber feet so it would sit softer on the desk, and stay in place better</li><li>Removed the chain-multiple-modules-together wedges because I think those are generally unpleasing to the eye</li><li>Reconfigured the holder slots to add both more slots, and more types of memory storage sizes and added embedded labels of the different types of media that will fit, that I am aware of. Oh, and I've provided two versions of the model, the second version is without embedded labels, for those that might prefer to not have 'em</li></ul><p>Here's a list of known media types that it will hold. There may be more, but these were specifically considered with the design:</p><ul><li>SD</li><li>MicroSD</li><li>Compact Flash</li><li>USB</li><li>SIM card</li><li>Fuji xD Picture</li><li>Sony Smart Media</li><li>Sony Smart Media Pro/Pro Duo</li></ul><h3>&nbsp;</h3><h3>Print Settings</h3><p><strong>Printer: </strong>Qidi X-one2</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>0.20</p><p><strong>Infill: </strong>20%</p><p><strong>Filament:</strong> eSun / Any PLA</p><p><strong>Filament Color: </strong>Black / Any<br>&nbsp;</p><p><strong>Notes:&nbsp;</strong></p><p>I did use a brim when I printed, but I'm not convinced that one would be necessary. Your call there.</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: Organization</p>