Direct drive extruder for anycubic vyper
cults3d
Direct drive extruder for anycubic vyper The heatsink from trianglelab is used. Thermal barrier with threads on both sides. If the adapter from the heat sink to the strain gauge does not fit the heat sink then print it 105% wide and long, 100% high. You will need to drill in place 2 holes to attach the adapter to the load cell and screw in 2 bolts m3 (can be taken from the strain gauge) Orbiter connected without modifications. It was necessary to adjust the flow. Standard flow was 405 became 667. What is needed: Fused nuts - 20 pieces. Bolts: 2 washers m3 (to put under the orbiter) may not be needed 10mm - 2 pieces (fit from the load cell) 25mm - 8 pieces. 15mm - 10 pieces 4 bolts to the plate fit from the native cover mount
With this file you will be able to print Direct drive extruder for anycubic vyper with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Direct drive extruder for anycubic vyper.