Disc Shooter Mk4

prusaprinters

<p>Semi automatic disc shooter - fully 3D printed - no extra parts or glue required.</p><figure class="media"><oembed url="https://youtu.be/desvpfF1py8"></oembed></figure><p>&nbsp;</p><p>Done as an engineering challenge and to show what can be done with 100% printed things, its also a lot of fun. &nbsp;Last part of a series of shooting things.</p><p>&nbsp;</p><p>Settings:</p><p>All done with 0.2mm layer and grid infill.</p><p>Plate1: &nbsp;20% Infill - Support on build plate only, No brim - No raft</p><p>Plate2: &nbsp;20% Infill - No supports - No brim - No raft</p><p>Plate3: &nbsp;40% Infill - Supports everywhere - Brim - No raft</p><p>Plat4: &nbsp;40% Infill - No supports - No brim - No raft</p><p>DSDiscPlate: &nbsp;20% Infill - No supports - No brim - No raft</p><p>&nbsp;</p><p>Note: If you have issues with the bolts fitting (all printers are different) you can resize Plate4 in your slicer and that should help.</p><p>This model is a development from my Mk3 disc shooter, but basically a new model as every single part (including screws) were all re-designed, so I didnt flag it as a remix (let me know if I should do).</p><p>&nbsp;</p>