Display cover for Hictop 3D printer HIC-3DP17
grabcad
After having moved the display of my Hictop, as I have set up the housing for 3 strands of filaments at the top, I needed to cover the back of the display.You need for installing 3 12 mm spacer and 3 20 mm screwUse spacers for assembly:To install the cover, use 12 mm spacers and 20 mm screws. remove 3 of the old screws on the display board, leaving one of the screws at the bottom to hold the card fixed, then insert 3 new 20 mm-long screws into the cover, insert the 12 mm spacers and apply the cover to the card to match the screws with the holes on the board. screw the 3 screws and you're done!For download item without logo go here: https://www.redpah.com/profile/16098/sergio-lanna
With this file you will be able to print Display cover for Hictop 3D printer HIC-3DP17 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Display cover for Hictop 3D printer HIC-3DP17.