Divided Carrier (smaller print bed) for Filament Carousel
thingiverse
I modified the carrier piece of BensHacks' Filament Carousel to allow it to be printed on smaller print volume printers like the Ender 3. I cut off the "wing" portions and divided it into five printed parts: one main body, and four wings that connect together with pegs that insert into holes in the main piece. To assemble the components, I recommend using CA glue or another kind of PLA-compatible adhesive. Be careful when using CA glue because pushing the peg into the hole can cause excess glue to spray out. Use it sparingly and try not to get it in your eye. You need to print: 1x carrier main 4x carrier wing You still have to print the base and hub pieces, which can be found on BensHacks' original thing page. Apologies to anyone who downloaded and printed v1 or v2 of the wing model - the pegs were too big and had been corrected in v3.
With this file you will be able to print Divided Carrier (smaller print bed) for Filament Carousel with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Divided Carrier (smaller print bed) for Filament Carousel.