Divider for Sterilite 6qt bin

prusaprinters

<p>Drops into a Sterilite 6qt bin to divide the bottom in half if you need more granular storage.</p><p>I printed with no top or bottom layers to get only infill which dramatically reduced the print time.</p><p>Three versions available:</p><ol><li>sized to slice on PrusaSlicer for the MK3* at 0.3mm layer height, the wall thickness of 1.1mm results in two shells for quick printing.</li><li>sized to slice on PrusaSlicer for the MK3* at 0.2mm layer height with a thinner wall of 0.86mm. Would be lighter but slower to print due to the smaller layer height, don't know why you'd want this choice.</li><li>sized to slice on Cura or similar that sets extrusion thickness to 0.4mm</li></ol><p>I only use the first model but provided the other two if it might be useful to someone.</p>