Diving Camera Tray for compact cameras

thingiverse

This is an easy to print 5 part dive tray. You may attach lights with flex tubes to the handle bars if needed. I have joined the parts by inox screws for longer lasting parts. I used the tray for several salt water dives down to 43m / 140ft max depth. The tray did not pick up water and could withstand a test at land held at only one handle with camera + 2 lights attached. The wider base makes the tray quite stable under water. So when filming you will have less shake. What you need: 4x M6x25mm 4x M6 nuts 2x 6x60mm or 6x70mm (mounting the bars to the tray extensions) several 6mm washers 2x rubber bicycle handle bar grips for 22mm bars 1-3x 1/4" UNC tripod mount screws, 15-20mm long (depending on your camera case) optional for lights: 2x 5x50mm (mounting the pipe caps to the bars) 2x 3/4" pipe caps with 5mm hole drilled in center 2x 3/4" flex pipes / coolant pipes 2x 5mm washers 2x 22mm rubber washers to stop tubes from rotating in the cap The lights seen in the photos are attached to a wall mount tube bracket, welded to the flex tube.