DIY E3D V6 Water Cooling
thingiverse
Designed up this water cooling system for e3d v6 hotend to prevent clogging on fully enclosed printer. Because ambient temperature inside build area is very hot, around 60°C, it will often break the regular fan. Printing: water-jacket-1 - no supports needed water-jacket-2 - supports needed Print with ABS only, and need to post printing using acetone. Put e3d v6 heatsink to water-jacket-1, and close with water-jacket-2 on top. Glue with any water tight and strong glue (i use epoxy) and paint it with 600°C high temp paint. I use silicone tube ID 8mm. Additional print: diy-radiator-holder - need two heatsink, two fan, and one water block. need support. nipple-l and nipple-y - need support
With this file you will be able to print DIY E3D V6 Water Cooling with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on DIY E3D V6 Water Cooling.