DIY Wireless Charger
thingiverse
Needed a small case for some DIY wireless chargers I purchased. The model prints fine without supports and snap fits together (Thanks to the Adafruit tutorials). I printed mine in Matterhackers build series PETG. The board does get hot but PLA should still do fine. I picked PETG so i could put one in my vehicle and it withstand the hot Florida summers. Wireless charger can be found <a href="https://www.amazon.com/Creazy-Wireless-Charger-Circuit-Charging/dp/B01N9PUIYG/ref=sr_1_4?ie=UTF8&qid=1529257911&sr=8-4">here</a>. Edit: Looks like the original charger is no longer available.<a href="https://www.amazon.com/SUKEQ-Wireless-Charger-Charging-Accessories/dp/B07BWC64VW/ref=sr_1_12?s=electronics&ie=UTF8&qid=1539795363&sr=1-12">This</a> one looks to be identical but someone else will have to confirm. Added a new charger top with rounded edges and a charging stand that fits the new top. I'm currently using it with an iPhone 8 inside an otter-box case and seems to be working well but i may still end up having to adjust the alignment of the charger on the back of the phone.
With this file you will be able to print DIY Wireless Charger with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on DIY Wireless Charger.