DJI Air Unit - Scion Drones Tau

thingiverse

This is a mount for mounting the DJI Air Unit into the Dronist Scion Drones Tau frame. If you try to add the DJI air unit you will find that it doesn't fit in the frame with the back standoffs in place. Therefore you will need this mount specifically designed to match the frame and replace the back standoffs, in order to make space for the antenna connectors on the unit. the holes are 3mm in diameter and will allow an m3 screw to be screwed directly into the print. But it's recommended to use an m3 bolt of 32 mm's or more all the way through with a locknut on the opposing side to lock the frame together. When mounting the air unit. push the unit through the print and turn it upside down so the MMCX connectors are at the bottom plate. this ensures that the connectors won't pop out in a crash. when the included antennas and the mount below is used. There has been made an antenna mount that goes together with this one, and you can download that mount here: https://www.thingiverse.com/thing:4530133 For mounting the camera I got an adjustable mount for the DJI Camera on this link: https://www.thingiverse.com/thing:4530115 This is best printed in TPU upside down with 15-25% infill and support everywhere. Designed by me (McHauge).