DJI FPV Goggles V2 top battery holder

thingiverse

# DJI FPV Goggles V2 top battery holder. Use the default top strap point to mount the stock battery. Usually, you side mount the battery of the goggles or in the back but I just hate it. It make the goggles imbalanced so I had rather have it in front than any other place. --- # Preparation To install it, unscrew the bracket and rescrew it back inverted with the bracket pointing outward instead of inward. Screws are hidden behind the velcro. --- # Notes The support by itself hold without any additional securing method. Only friction is enough in my test part. Same apply for the battery but in both case, I have added hole for straps. --- # Print No support is required, print as it. On my MK3, 0.3mm take about 1h45 while 0.2mm is 2h42. ## Print version Two version are provided: - 40mm: the bare minimum length - 73mm: full battery length with additionnal hole to secure the battery If you want the lightest possible, use the 40mm else take the 73mm as it add holes for the straps to keep the cable in place. --- # Optional BOM 2x cheap velcro strap (15mm wide max) if you want to secure the battery and cable (only for 73mm version) 1x velcro strap (20mm wide max) if you want to secure the battery to the goggles