DJI Osmo Mobile 3 Vlog Microphone Mount

thingiverse

Remix of m4RT1n's DJI Osmo Mobile 2 mount, this is much the same but is redesigned to fit the newer Osmo Mobile 3 and DJI Tripod Stand. Simply place the completed model between the Osmo Gimbal and the Tripod Stand and tighten up the screw. The model is designed to suit mini shotgun style vlogging microphones (like the RODE Mic Me / Move VXR10 / Boya BY-MM1 / Neweer CM14 etc). There are two slightly different versions; my preferred being the one that utilises a 24mm diameter x 1mm thick rubber disk for grip and to protect the base of the gimbal. But if you don't want to go that route you can print the simpler version of the base without the cut-out area for a rubber disk. The model is in two parts and requires an M3 screw (I used hex head M3 x 8mm) and it prints nicely in PLA at .2mm with 25% infill and supports everywhere. ===== MARCH 2020 UPDATE: Right Hand Extended version added which positions microphone accessory on the right of the OSMO 3 Mobile handle. ===== If you like this model please click the 'Like' button. And I'm super happy to see photo's of people's makes, so please come back and share a picture of your print. :-D And if you found my design helpful or it saved you some $$$ I'm always grateful for a small donation that will help fuel future designs by way of a cup of coffee. Thank you. ===== This model is not to be uploaded or sold in any form, or modified, and is intended for personal use only.