Pattaya3D Glider - Lupazzo Remix NO GLUE

thingiverse

Inizio ringraziando Daniele (https://www.thingiverse.com/atlaware) per il progetto originale! Mi sono solo permesso di aggiungere qualche piccola modifica per semplificarne l'assemblaggio e facilitare la stampa. If you have any doubts I recommend that you rely on the original project, the author is certainly more experienced than me The changes in this version are: 1. the model can be assembled without glue, you just need some carbon tubes (or toothpicks) and a cloth tape. This makes it easier to replace parts in case of a crash. I recommend glue only to block the 2 pieces of the wing 2. added a support for the motor, this must be fixed with 4 self-tapping screws 3. removed hole for internal locking wings 4. add hook for external wing lock 5. added a hook to close the door 6. added small supports (to be cut) to improve printing 7. adapted to also work with DS-939MG DIGITAL METAL GEAR SERVO During printing I suggest you add additional infili with cura, see the attached photos! I print all with 0.4mm nozzle, this is my setup | | wall | infili | thickness | layer bottom | layer top | |-------------|------|------------------------------|-----------|--------------|-----------| | Body | 2 | 15 | 0.2mm | 2 | 2 | | Tail middle | 1 | 3-2 + internal reinforcement | 0.2mm | 2 | 2 | | Tail | 1 | 0 + internal reinforcement | 0.2mm | 3 | 2 | | Wing 1 | 1 | 3 + internal reinforcement | 0.2mm | 3 | 2 | | Wing 2 | 1 | 5 | 0.2mm | 2 | 2 |