Double 1u server stand (vertical)

prusaprinters

<h3>Why</h3> <p>Rack servers are great if you have a big rack to hang them in, but if you don't, you have to improvise.</p> <p>Also includes a little spacer for the top of the servers.</p> <p>It works fine for me, but use at your own risk.</p> <h3>Features</h3> <ul> <li>No supports needed</li> <li>Holds 2 standard 1u (1.75"/44.45mm) size servers, vertically</li> <li>200mm maximum width, should fit most printers</li> </ul> <h3>Instructions</h3> <ul> <li>.25mm layer height is fine</li> <li>No supports needed</li> <li>Print on its side for better strength</li> <li>Use a minimum of 3 or 4 walls and 10% infill</li> </ul> <h3>Open Source</h3> <p>As always the original design file (fusion360 + STEP) is included, so feel free to improve it (or learn from it)!</p> Category: Electronics