Double 2.5" SSD Mounting Bracket
thingiverse
A mounting bracket for stacking two SSD's on top of each other. The two drives attach to the brackets via the side mounting holes, leaving the bottom of the lower drive completely clear to mount to your drive bay/drive adapter/PC case. This bracket should fit any 7mm tall 2.5" SSD or HDD. When assembled, there is a 7mm air gap between the two drives to allow for ventilation. Total height fully-assembled is approximately the same as a 3.5" HDD. To assemble, you will need: * 2x Mounting Brackets * 8x M3x5mm Screws * 2x SSD's or HDD's, or mix-and-match :) Dimensions were based on mechanical drawings from: https://www.intel.com/content/dam/support/us/en/documents/ssdc/hpssd/sb/Intel_SSD_520_Series_Product_specification.pdf
With this file you will be able to print Double 2.5" SSD Mounting Bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Double 2.5" SSD Mounting Bracket.