Drag Chain Mounts - Inventables X-Carve

thingiverse

Here are some redesigned X-Carve drag chain mounts for a 15mm x 20mm drag chain on the 1000mm X-Carve. I did my best to increase the rigidity of these parts. DRAG CHAIN: The drag chains I sourced can be found on Amazon but the ones from eBay should work too: http://www.amazon.com/gp/product/B00FH6ZMZ0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01 **You'll need to order 3 to get the full range of your x-carve by snapping a few more links on each chain. HARDWARE: You can get the hardware at lowes or homedepot for about $5. You'll need: - 8x M4 x 12mm (countersunk) - 4x M4 x 12mm (button head) - 10x M4 nylon lock nuts or plain hex nuts (easier installation, but may become loose over time) - M4 washers (optional) - 2x M5 x 8mm (button head) (but i used M5 x 10mm with washers) UPDATE: Part 14058 works but i think it could use more rigidity, feel free to modify my design and beef it up (maybe draw inspiration from an I-Beam) or print in Nylon.