Dremel Drill Press - Splitted Holder Model 395 et al
thingiverse
Made my changes to awesome Drill Press - Thanks for the STEP-File: - Splitted the Tool Holder in two parts, because the original holder was to high for my printer. Fixed with a M6 threaded rod (2x M6 Nuts) - so this is very stable! - Made a "universal" hole plate on the tool-holder, in order to change the tools (eg. solder iron for brass nuts). There are a few M4 holes in order to mount different tools. - Changed the top cap to get the rod through, as well as changed the cable mount. no support needed! - Made a holder for my DREMEL 395 (lower and upper holder) and a Nut to secure it from below (2x M4 Nut & DIN912 M4x50 for the crimp and 2x M4 Nut & M4x20 for mount on the tool holder plate) - Made a simple stopper to set the drill depth (1x M5 Nut & DIN931 M5x40/45) - Made a cap for the 22mm rod - Used the base from this remix - thanks for the design: https://www.thingiverse.com/thing:4609373 - Clamp for the pipe was too loose, so I simply used some duck tape to fix the problem. - Printed everything in PLA (0.6 nozzle) with 5 perimeters and 5 top/bottom layers --> rock solid - Happy Printing!
With this file you will be able to print Dremel Drill Press - Splitted Holder Model 395 et al with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dremel Drill Press - Splitted Holder Model 395 et al.