Drill Dust Catcher with Handle (No Supports)
prusaprinters
<h4>Dust Catcher with Handle</h4><p>A simple dust catcher for drilling. Includes a small knob/handle for controlling/holding the catcher without getting your fingers near the drill tip.</p><p>The bottom container's outer wall is angled at 45° so there are no supports required for this print! Just print it on its back / facing up.</p><h4>Design</h4><p>Designed in Tinkercad.</p><h4>Print Settings</h4><p>Whatever material and layer height you want to use!</p><p>Recommended: 0.2-0.3mm Layer Height, PETG (better strength) or PLA+/PLA.</p><p>Supports: No</p><p>Rafts/Brims: No</p><p>Max Unsupported Overhang Angle: 45°</p>
With this file you will be able to print Drill Dust Catcher with Handle (No Supports) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Drill Dust Catcher with Handle (No Supports).