Drill Press Base w/Clamps
thingiverse
UPDATE: New version uploaded.v1.1 - Enlarged the slots to correctly fit a 6/32" nut. This is a remix of MarkBenson's Drill Press for Hobby Drill. This base incorporates 2 slot for clamping down your project. Slots are for 6/32" screws that are 10mm long. The larger slots on the bottom are for the nut to fit tight so you don't have hold them while adjusting the Clamps. I also elongated the pass through for different setups.Instructions - See Instructions tab.P.S.: This "Thing" will not be here forever. I hate Makerbot/Thingiverse and will post this up on Youmagine and other 3D hosts. Once I have this model uploaded elsewhere, it will be deleted from here and a link added to the other hosts.UPDATE: Added Solidworks files. Instructions Print the base with 20% infill, 2 shells. I would also recommend using support due to the over hangs on the slots and the hole for the nut. Dimensions: 110mm x 125mm Print the clamp with at least 80% infill and 2+shells. The more infill and shells the stronger it will be.
With this file you will be able to print Drill Press Base w/Clamps with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Drill Press Base w/Clamps.