Drone/FPV battery tray hooks

thingiverse

These hooks will go on a HobbyKing S600 Quadcopter but can go on any other similarly configured drone. My measured distances are 59mm between rods and 24mm hole distance. This is not normal, so you would have to slightly adjust the openSCAD file I have provided if yours features the usual 60mm rod spacing and the 23mm hole distance. You can also adjust the depth of the hooks to adapt for lighter or heavier batteries. Currently the STL has 12mm depth. The upper shape is a parabola, contact me if you need help adjusting the parameters to smoothly hit the claw shape. I will follow up with a battery tray that features slits for velcro straps and stops that prevent the battery from slipping out. Here's the configurable battery tray: http://www.thingiverse.com/thing:1219149 The hooks will hold regular M3 hex nuts and the holes should accept M3 machine screws without drilling. Print Settings Printer Brand: RepRap Printer: Kossel XL Rafts: No Supports: No Resolution: 0.4mm Infill: 20% Honeycomb Notes: PLA