Drone frame BO100H (6 mm motors)

thingiverse

More light version: BO100L: http://www.thingiverse.com/thing:1162167 Small RC nano drone frame: Use: 6mm standard engines (as used in many small consumer nano drones) 3.7 V lipo battery, 150 mAh Dia 37 mm props I transplanted parts from the 'Concept drone 011' (there are many of this kind of small starter drones). Glue the battery frame to the bottom of the main body. Make sure to center it properly. Choose from wide or narrow battery frame depending on battery size. And choose the standard or the higher frame. The higher frame has a deeper space (1.8 mm more) for the pcb and a gap (8 x 9 mm) to fit the battery connector. For attaching the feet to the main body some light grinding of the main body may be required. Same for placing the engines. 20-11-2015: update: Main body frame has channels for throughput of wiring to the pcb section Main body frame has bigger gaps to hold the bumper (no glue required) A closing ring is added that closes the pcb box by putting it between the bumper and pcb box cover Pcb box cover fits better A more narrow battery frame is available to hold a standard lipo 3.7 voltage 150mAh battery A main frame with more pcb space (1.8 mm more depth and a gap for the battery connector) is available. Print Settings Printer: Da Vinci Jr 1.0 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10% Notes: Built on XYZ DaVinci printer, PLA material