Drone Stand for Dromida Kodo HD

thingiverse

This is a stand I designed for my Dromida Kodo HD. The drone is put on the stand by sliding it onto the stand through the battery holder. There are also slots for the battery and controller. It has supports so that the stand is balanced when taking things off it or putting them back on. Edit: added a file for the assembled stand but with the battery holder separate because getting support material out of that thing would be a pain. You can glue the holder on after the print. Post-Printing I think it came out pretty well. Here are my thoughts: The battery holder is a good size. It's big enough that the battery can be slid in and out easily but small enough to fit the battery well. I must have measured wrong on the controller holder, because the controller doesn't quite fit in. I made the slot bigger in the design but I didn't feel like reprinting it so the pictures I gave of the finished product have the small version. The struts on the controller holder do a great job of balancing the stand, despite looking as if they will come off if you move them a little (this is probably due to my lack of gluing skills). I like the minimalist look of it, but still wish I didn't need those struts under the controller slot. Print Settings Printer Printrbot Play Supports No* Resolution N/A Infill I used 15%, as I do for most of my prints. *If you use the assembled file, you will probably supports. But if you are OK with just using the pieces file and gluing everything together later, you will not need any supports.