dt750 yaw mount
thingiverse
After searching a lot for the perfect yaw mount I decided to design me one. I got solidworks, so I should draw something. After a crash with an bad mount I got something to draw! It's designed for a tricopter using 12 mm booms, dt750 motors and a bms-620mg servo. Use epoxy or another strong glue to mount the mount to the servo axle. Be sure to not glue the mount to the servo case, so use only a small drop of glue. To mount the motor to the mount, I used 4 mm zip-ties. I used the same to mount the mount and the servo to the frame. Note: the bottom piece of the mount is NOT symmetric! When used in the correct direction it should turn smooth. I used a 3 mm shaft to turn around. Drill one time through the holes of one part of the mount. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 mm Infill: 40% Notes: The top should be flat printed. The other part of the mount should be straight up, so the support would be minimal.
With this file you will be able to print dt750 yaw mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on dt750 yaw mount.