Duet Controller Housing for Paneldue, Duex4 and 4.3" LCD, or 7" Touchscreen Display For Rostock

thingiverse

Rostock Max V2 Duet Controller and LCD Housing: This is a 4 part system that will mount the different accessory boards for the Duet. Part 1 is the base, this will allow you to attach the assembled housing the same way the stock does and mounts the optional Duex4 board. Part 2 mounts the Paneldue and houses the ribbon cable for the display. Part 3 is the LCD display mount, you can choose the 4.3" LCD touchscreen display or the 7" LCD touchsreen version. Part 4 is the Duet controller mounting board with two 40mm fan mounting areas. This is a direct replacement for the stock RAMBo controller board mount. This allows you to print the rather large housing in more manageable prints and allows for enhancing the housing with other designs or upgrading the displays without printing the whole thing. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX BYOE Rafts: No Supports: Yes Resolution: .56 Infill: 40% Notes: I used PETG 4 outer shells, 3 top layers, 2 bottom with brim. You will need at least need a 250mm diameter of printable surface on your build plate. Post-Printing Drill your mounting holes with a rotary tool and screw together.