E11 Blaster T-Track - Rogue One / Mandalorian Style

thingiverse

These are accurate shape T-Track strips for the E11 Blaster used in Rogue One and the Mandalorian. Probably any new series that is coming out, you can expect this style of T Track to be used on the E11. The original trilogy (OT) E11 used slightly different T Tracks that had a slant to them and a more narrow central peak to the central part. The new ones have a more robust central part and are thought to have been sourced from here: https://www.tubewaysales.com/cat/plastic-trims-and-miscellaneous-items/plastic-insert-and-t-track You can follow the discussion here: https://www.whitearmor.net/forum/topic/41271-rogue-one-e-11-blaster-reference The attached photo is a reference photo from screen used E11 in Rogue One or are pictures of modified Airsoft S&T Sterling L2A1 AEG that was used in Rogue One. I believe there are other blasters that may use this T Track as I've included a variety of lengths and options. The Shoretrooper smaller blaster uses these as well. The stub STL is just the basic shape that you can elongate and make the size you need. All other options are as follows: - Short trimmed - 40mm with extra to bend through barrel - Short - 45mm in length - Medium - 140mm in length - Long - 200mm in length The screen used T-Tracks are roughly 200mm in length and depending on your build, you may need more or less, hence the various sizes. The trimmed versions are for matching the screen used blasters. You can see in the screen used images that the T-Track has had the bottom trimmed off it and the edges have been sanded so they are rounded. The top part is then inserted into the barrel holes and then bent back. Some reproductions are not trimming this piece off and have inserted and entire T Track into the barrel holes, also referenced in one of the pictures. Use a heat gun or hot water to soften your plastic to insert the T-Track into the E11 blaster holes. One picture that is attached shows shorter individual T-Tracks that are under the flashlight that is attached to the E11 in Rogue One. The Flashlight is missing in this picture, but you can clearly see the shorter T-Tracks which are the 40mm length ones. On two different 3D printed E11 models, the distance for that is 40mm, but I think it could vary between different reproductions and models. My WarMachine E11 is in the mail, so I may add more files when I get that so everyone will have it. Reference picture is from WhiteArmor.net Rogue One Celebration Europe Gallery: https://www.whitearmor.net/forum/gallery/album/99-r1-celebration-europe/ Update 4/15/2020 ----------------------------------------------------------- The WarMachine E11 Barrel would need 45mm length T-Tracks. This is measuring the outer front edge of one of the barrel circles, skipping one circle, and then ending the measurement at the back edge of the third circle. So two sets of three circles in all that need to be covered by T tracks where the flashlight is. On another 3d printed E11 model I have, this distance is 46mm. So I believe most E11's will need this length. I've changed the "short" file to be 45mm. I have an AirSoft Sterling in the mail and will compare these findings with that when I get it.