E3d V6 5015 Blower 30mm fan E3d Titan Prusa i3 mount

thingiverse

Remixed from the following links: https://www.thingiverse.com/thing:2769783 https://www.thingiverse.com/thing:2234183 https://www.thingiverse.com/thing:586636 Just a system for mounting an E3d Titan, 5015 blower fan, and an inductive probe (pancake NEMA 17 only) to a Prusa style printer. Should work with Anet A8, Prusa Bear frame, Etc. Credit for the designs goes to the remixes listed above, of course. I did make some minor modifications to accommodate m3 bolts. If you want more up-to-date designs, follow the links above. I will try to keep the files contained herein up to date, but that's likely not going to happen very often. Ping ThatMattGuy in the 602 Wasteland Discord (https://discord.gg/DJzA48Q) for questions. # List of hardware: * E3d Titan * Pancake Stepper * E3d V6 * E3d 30mm fan with the 4x mounting screws * NEMA 17 Pancake (under 20mm body length) (with inductive sensor) (one of the other) * NEMA 17 stepper, standard size (no inductive sensor) (one of the other) * 4x M3 screws at least 15mm long (titan mount) * 5015 blower fan * M3 x 30mm bolt or zip tie (holding 30mm duct to heatsync) * 2x M3 x 20mm (5015 blower fan mounting) * M3 x 8mm (fan duct mounting) * 8x M3 hex nuts * 4x LM8uu # Assembly Pretty self explanatory. Assemble the fan duct first - attach the 30mm fan to the 30mm fan duct (4x self tapping screws), attach the 5015 to the plate with 2x M3x20, snap onto 30mm fan duct and slide onto E3d V6, and secure with m3x30 or zip tie. Attach fan duct with M3x8 bolt. Make sure to assemble the Titan as rendered - motor on the right, titan on the left. Add the E3d to the Titan prior to assembly on printed part. Bolt titan holder to the carriage with 4x M3x15 bolts. Attach the fan duct below e3d with M3 x 8mm, making sure the block is not too close to the fan duct.