E3D V6 Nozzle box Multicolor (optional)

cults3d

A box for nozzles, specifically E3D-V6 nozzles. Use M3x8 headless set screws for the hinges The text is 0.6mm deep If you don't want to print in multicolor or don't have the ability to print in multicolor it works just as fine to print in one color, obviously no text will be visible if printed in one color, unless: Here's how to print in single color with engraved text on only the inside using PrusaSlicer 2.3.3 Open the lid .stl file Place it with top side down Split the lid into objects In the sidebar you now can see the lid and all the letters as individual objects. Delete all letters that are on the inside of the lid without moving any objects on the buildplate. When I do it it is objects 22-72, but this may not be true to you, so check carefully. Go to menu File-->Export-->Export plate as STL.. And save it, be careful not to overwrite original STL file Delete all objects Load the previously saved STL file If you want to print the text on the outside of the lid as well just delete those objects too and then you don't have to export it as a new STL