Eachine Falcon 120 FPV drone camera dome

prusaprinters

<p>The Falcon 120 drone has a vulnerable camera, designed a little observatory style dome to offer some protection to the camera.</p> <p>Mount by drilling holes in print and using M2 nut &amp; bolt to attach to the two slots under the tabs on each side of the camera dome.</p> <p>V3 allows the RX board to be mounted on the back of the dome, this needs a different antenna like the Triumph pictured to free up enough room. The nuts are mounted on the top for base mounting - they are tight fit so as to lock against the side.</p> <p>Must be printed with supports due to dome and probably a raft to help give it a good bottom to the print.</p> <p>x6b rx fits to the back of hood with M2 nut and bolt. Use the "hood pocket" to convert the mounting to work with a a8s rx</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Printrbot</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Printrbot Simple Metal</p></div> <p><strong>Rafts:</strong></p> <p>Yes</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>30%</p></div> </p></p></p> Category: R/C Vehicles