Eagle Tree Vector Anti-Vibe Mount for Tarot 680 & 680 Pro (45mmx45mm)

thingiverse

UPDATES! July 2015 - Updated to fit the Tarot 680 Iron Man and the Tarot 680 Pro frames. This thing is a mounting bracket that employs small vibration dampening balls to mount an Eagle Tree Vector on a multirotor frame with the common 45x45mm hole pattern. With the Vector this sits 30mm tall and I would recommend a 35mm tall gap overall. I've tested this on various airframes including: Argonaut mini hex Tarot 680 Iron Man & 680 Pro Fortis Titan tricopter RCExplorer tricopter I've also used the Vector mount itself for fuselage installation in Bixler2 and other FPV planes, where it was nice to have a fixed position already reserved but be able to pull the Vector out to make wiring changes. It always ends up in the same spot this way. In my Bixler I held it in place by shoving a piece of squishy foam in there above it. On multirotors I use a rubber band and so 2 sided 3M adhesive tape. I'm sure you can figure it out. I specifically made this for the Argonaut 370mm Mini Hex but it will fit any frame with that hole pattern. There is a version that moves the Vector forward 3mm; this was necessary in the Argonaut and might come in handy. Instructions You will need these. The gap between the plates is 10mm when fitted. The narrowest part of the dampener is 6-7mm and the flange is 12mm diameter. http://www.hobbyking.com/hobbyking/store/__40613__Vibration_Damping_Ball_80g_8_pcs_bag_.html I printed on medium res and 50% fill with PLA. The vector is stuck down with 3M double-sided adhesive strips and a rubber band for security; tape would do in a pinch.