Eaglemoss Delorean 1/8 scale real seats

thingiverse

This is the release of the Eaglemoss scaled real Delorean car seats, These were created from 3D scans from an original Delorean seat, and scaled to 1/8 scale for the Eaglemoss Delorean. The 3D scan was created by Dana G, en the scan was reworked by me to make it 1/8 scale and printable, Some details were redone to make them better and smoother for resin printing. The files are separated into solid STL, for FDM printing, and hollow for resin printing. The wall thickness of the hollow version is 1.5mm, with drain holes, and is strong enough for printing. You can always make your own hollow version from the solid STL’s (don't forget the drain holes. I have resin printed the parts on my Epax 1, and the files fit the workspace, and as the Anycubic Photon, or most resin printers have the same platform size, it should be no problem printing both parts at once. Printing time on my Epax was 11 Hours at 0.025 resolution, and they came out fantastic, you might even get away with 0.03, but I don’t think you should go higher then that, you might loose the fine details of the stitches in the seat. To make both seats you would have to mirror the first seat, and print again, obviously :) Included is the 1:1 scale original 3D scan, just if you want to make a better version of mine, just remember to link your files here, so users can keep track of all the iterations of the seats. If you are printing these for someone else, please keep the price low, this hobby is already pretty expensive, and denying someone accurate seats because of price, is not nice. Making the solid files hollow, or adjusting anything, can be done using Meshmixer, a free mesh editing program, And there are a lot of instructions videos available on Youtube. And don’t forget to post your results and also have fun :)