Earbud-Wrap with Fast Release

prusaprinters

<p>I liked this earbud holder because of the quick release feature: the last loop with the audio jack holds the other loops in place. Release it, and you can release all the other loops instantly.</p> <p>I redid the original as a commented, editable .scad file. I added two central holes so you can thread the cord through them to keep it handy while you are listening.</p> <p>earbudcard.scad is the source of the .stl and what I actually printed.</p> <p>earbudBusinessCard.scad is redrawn to be the actual size of a standard business card. Since it works in various sizes, it's the one you should use for your customizations.</p> <p>Be sure to check out <a href="/ALittleSlow/about.">ALittleSlow</a>'s <a href="https://www.thingiverse.com/thing:2786081">remix</a></p> <h3>Print instructions</h3><h3>Category: Mobile Phone Print Settings</h3> <p><strong>Printer:</strong> Monoprice Mini select</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Notes:</strong></p> <p>I used top and bottom of 0.8mm PLA at 200°. But this is not a fussy print.</p> <p>Bed heat 60°. I use painter's tape and glue stick on my bed.</p>