Easel stand for photo or painting

prusaprinters

<p>This is an easy and straightforward print to hold up your favourite display piece, photo, painting or the CD/Vinyl cover of your current jam.</p><p>All parts are printed separately to avoid using supports, so you must assemble it yourself using a piece of filament (1.75mm) and (optional) approx. 12cm of twine/string.</p><p>&nbsp;</p><h5>Printing Instructions:</h5><p>STLs should already be oriented the correct way for Prusaslicer. I arranged the parts on the print bed parallel to the x-axis.….else use the attached gcode for MK3S.</p><p>I printed this at 0.3mm resolution with 20% infill, supports are not required.</p><p>&nbsp;</p><h5>Assembly Instructions:</h5><ul><li><strong>Orientation:</strong> Lay the legs flat on a table in the same way they were printed (i.e. last printed layer facing up). &nbsp;Now is a good time to figure out the orientation of the horizontal piece, it goes in one way.</li><li><strong>Joining Legs:</strong> Push a length of filament through the holes located at the top of each &nbsp;of the 3 legs, this will be a snug fit then trim the ends (I left 2-3mm protruding on each side for effect)</li><li><strong>Horizontal Piece:</strong> Align the 3mm holes of the horizontal piece and the centre leg to determine the placement of this part. &nbsp;You can use a tooth pick or filament to line it up. &nbsp;Then press fit the horizontal part to the left and right legs. Again, take care with the orientation of this piece it only goes in one way.</li><li><strong>String:</strong> The bottoms of the legs are angled to sit flat on the table when easel is in the opened/working position but if you choose to use a heavy display piece, use a 12cm twine through the 3mm holes and knotted at each end for additional support.</li></ul><p>&nbsp;</p><p>Enjoy!</p><p>&nbsp;</p><figure class="image"><img src="https://media.prusaprinters.org/media/prints/148287/rich_content/e2ed05d7-f0bb-41d5-9550-34913f0ab8ed/ezgifcom-gif-maker-4.gif#%7B%22uuid%22%3A%226ff84da9-af14-4377-b4e3-d5f75ff7b34b%22%2C%22w%22%3A296%2C%22h%22%3A296%7D"></figure><p>&nbsp;</p>