Easy 3D printable Game Arcade 7 inch TFT (low print time)

thingiverse

#Why? I designed this arcade for a low print time for the Anet A8 but it will be printable on other printers aswell. Use wood filament or any other material! I wanted to built a full game arcade but many I found used too much material and had too many components to print! This is a tailored arcade to easily 3d print. I designed it to be minimalistic, yet still a lot of fun to build. You do not want to waste time and expensive material so I have made the wall thick enough to be stable and the sizes small enough (yet good) to reduce print time. I used a TFT HDMI screen with the hdmi connector on the right side, so I had to make sure that I offset the screen due to HDMI cable Management. Because of the small size and the TFT screen I recommend using this screenpanel if you use a TFT screen with the connector on its side. If you use another screen you can simple use another layout. Features: -I squeezed the sizes onto my print bed. -The plates are max. 21x21cm which means you can print it on almost any 3d printer since most printers are 22x22 cm. -Can be printed in 20-22 hours (average) ##Only 8 components to print! Please not that this depends on your nozzle size and quality setting. Nozzle size 0.4mm quality moderate (wood print) -controlpanel.stl 3-4 hours -left_panel.stl 5-6 hours -right_panel.stl 5-6 hours -front_panel-start-select.stl 4-5 hours -bottom.stl 7 hours -back_plate.stl 7 hours -top_plate.stl 1-1.5 hours -7_inch_tft.stl 1-2 hours ##Electronical components -Rasperry pi 3 -7 inch TFT HDMI -Joystick USB controller -Joystick Controller kit -Powerbank (for portable play) -Adapter -Portable USB Speaker ##Design video https://www.youtube.com/watch?v=6666Bvzr244 ##Don't forget to credit me! If you use this add a link to this page! I spent a lot of time designing it!