ebike parts Free 3D print model

cgtrader

Some 3d printed parts for my ebike. The bike is a HASA comp3.0 mountain bike fitted with a magic-pie-2 motor. Thing one is a 3 piece junction box which clamps around the handle-bar neck. It is not IP-anything but better than leaving the wires dangling in the wind and rain. The neck has "saga" printed on it, the neck angle is 100 degrees and the neck tubes are about 35mm OD. The second thing is micro-switch mount to sense the brake lever home position. Levers with switches were supplied with the motor but the bike has combined gear and brake levers so I had to roll my own solution. Thing-3. A mount for the cruise control switch. At least that is what golden motor call it. A bit like calling a nail a coat hanger. It is a throttle lock which does not attempt to hold a set speed. Pushing the button locks in the current throttle setting and it is cleared using the brake switches or pusing a second time. The orginal part would not have mounted in this convenient position. Photos of the older ebike are here.nerdipedia.com/tiki-index.php?page=magic+pie